EZ Stain Desert Gold

We used Brick Red on the patio to make the concrete feel more intentional. The first coat gave us a preview, and the edges were simple to touch up. The Brick Red color gave the patio the depth it was missing.

This color went on the tired back porch as part of a bigger outdoor cleanup. After we cleared the dust from the joints, the product spread more evenly than I expected. The back porch looks cared for again.

Cobalt Blue felt like the right color for the outdoor bar area because we wanted a bold blue accent. After we blew off the dust before starting, the application felt manageable for a weekend project. The outdoor bar area still shows texture, which is exactly what we wanted.

I wanted a fresh natural gray finish on the front walk, and this got close to the look I had in mind. After we taped the borders before rolling, the coverage was solid on the rougher spots. It looks better in person because the front walk still has natural variation. This was a good upgrade for the money.

I used Limestone Yellow to change the look of our courtyard without covering the texture. Once the concrete was clean, the main section rolled out cleanly. The color did its job because the courtyard no longer looks plain gray. The finished look matched what we had in mind.

Our patio needed something more finished, so we tried Brick Red. We waited for the morning shade, then it did not feel sticky or hard to move around. Once sealed, the patio had the depth we wanted.

We put Terra Cotta on the tired pool deck trim because it needed some character. We took our time with prep, and it brushed into corners better than expected. The pool deck trim looks cared for again.

We used Desert Gold on the pool deck to make the concrete feel more intentional. The first coat gave us a preview, and I could build the color slowly instead of overdoing it. The color gave the pool deck a custom look without covering everything.

I chose Emerald Green for the patio border because the deeper emerald green tone matched the area. We cleared the dust from the joints, then the coverage was solid on the rougher spots. The result worked because the patio border kept its natural texture.

Fiesta Green felt like the right color for the pool deck border because we wanted a garden-friendly green accent. We took our time with prep, and the main section rolled out cleanly. After sealing, the pool deck border had a more polished finish.

We chose Cobalt Blue because the old courtyard inset looked tired next to the rest of the yard. The first coat gave us a preview, and it was easier to control than a thicker coating. The courtyard inset looks refreshed without losing the concrete texture.

This color went on the porous driveway trim as part of a bigger outdoor cleanup. The surface was not perfect, but the open area rolled quickly once the edges were done. The result worked because the driveway trim kept its natural texture. I wish I had ordered a little extra for touchups.

The goal was to refresh the driveway band without making it look painted, so we used Antique Black. The first coat gave us a preview, and light coats gave us the most even finish. The biggest difference is that the driveway band looks maintained again. One section needed another light pass, but it blended in fine.

Terra Cotta gave our courtyard a cleaner look without hiding the surface. With the slab ready, it was easy to avoid a heavy coated look. After the sealer went on, the courtyard looked completely refreshed. The second coat made the biggest difference for us.

I picked Limestone Yellow for the garden path because I wanted a light warm stone look. I was careful around the borders, and a roller handled the open concrete and a brush cleaned up the edges. The garden path looks cared for again.

I picked Terra Cotta for the walkway because I wanted a Mediterranean clay tone. With the slab ready, light coats gave us the most even finish. After sealing, the walkway had a more polished finish. I am glad we took the time to do it right.

We used New Concrete on the porch landing to make the concrete feel more intentional. The surface was not perfect, but the main section rolled out cleanly. The color gave the porch landing a custom look without covering everything. Next time I would use a fresh roller from the start.

We chose Brick Red because the old planter curb looked tired next to the rest of the yard. The surface was not perfect, but the product spread more evenly than I expected. Compared with the old slab, the planter curb has much more character.

I chose Cobalt Blue for the front step accent because the deep cobalt blue tone matched the area. We cleaned around the expansion joints, then the application felt manageable for a weekend project. The finished front step accent feels cleaner and more complete.

We put Limestone Yellow on the older walkway because it needed some character. With the slab ready, it did not feel sticky or hard to move around. The walkway looks updated without feeling overdone.

We put Desert Gold on the dusty pool deck because it needed some character. We kept a brush nearby for the edges, then it dried evenly across the main section. The pool deck looks finished now, not just cleaned.

I chose Fiesta Green for the outdoor seating nook because the soft green tone matched the area. After we taped the borders before rolling, the open area rolled quickly once the edges were done. After it dried, the outdoor seating nook looked more intentional.

The Emerald Green color was a good fit for our dusty pool deck detail. Once the concrete was clean, it was easier to control than a thicker coating. I like that the pool deck detail has color without looking painted.

We put Cobalt Blue on the hairline-cracked courtyard inset because it needed some character. I was careful around the borders, and the concrete texture stayed visible while applying it. After it dried, the courtyard inset looked more intentional. The result was good, though prep took longer than the application.

This color went on the sealed-looking porch as part of a bigger outdoor cleanup. I was careful around the borders, and light coats gave us the most even finish. The result worked because the porch kept its natural texture.

We wanted the walkway detail to feel more finished, so Cobalt Blue was the color we tried. I was careful around the borders, and it did not feel sticky or hard to move around. Once sealed, the walkway detail had the depth we wanted. It made the space feel more finished.

This was my first time staining concrete, and Cafe went on our back patio. Application went smoothly because the concrete texture stayed visible while applying it. The finished back patio feels cleaner and more complete.

We chose Fiesta Green because the old patio accent looked tired next to the rest of the yard. The surface was not perfect, but it was easier to control than a thicker coating. The final tone made the patio accent fit the outdoor space better.

The outdoor kitchen area had a dull gray look, and Antique Black gave it a better finish. Application went smoothly because the application felt manageable for a weekend project. The final tone made the outdoor kitchen area fit the outdoor space better.

Terra Cotta gave our garden path a cleaner look without hiding the surface. After we blew off the dust before starting, the stain did not hide the surface pattern. The color gave the garden path a custom look without covering everything.

The Emerald Green color was a good fit for our patched patio border. We washed the older section twice, then the main section rolled out cleanly. I like that the patio border has color without looking painted.